What sizes are the two spacers? Im fitting a nc35 front end to my nc29, i have the rvf spindle but no spacers apart from 29 ones. Oh and if anyone has a spare set let me know

Chris.

Ive got some standard ones somewhere, if i can find em you can have em. PM your addy over and i'll have a look tomorrow

Nice one Tony, if you want to leave them attatched to those forks of yours i wouldnt have a problem with that lol. PM on the way fella.

Chris.

Same size as these:

viewtopic.php?f=17&t=23995

Rick Oliver does some Very Nice captive stainless ones on here?

veefer400 wrote:Same size as these:

viewtopic.php?f=17&t=23995

Rick Oliver does some Very Nice captive stainless ones on here?

That link shows vfr spacers doesnt it? Are they not different to the rvf?

chrisja2 wrote:

veefer400 wrote:Same size as these:

viewtopic.php?f=17&t=23995

Rick Oliver does some Very Nice captive stainless ones on here?

That link shows vfr spacers doesnt it? Are they not different to the rvf?

Just used Triarm spacers from my old wheel to fit an RVF front so Im guessing they are all the same size?

Thinking the same, maybe its something im doing wrong. Will have a look over the weekend, although the slash in my finger from an accident at work might hamper things a bit.

Hi Chris,
Have you moved the forks through the yokes?
I found that slight differences in the distance that the forks are through the yoke can make this a real ball ache. i had a difference of like 1mm, left fork was dropped 9mm through the yoke and right 10mm, and it took me fecking ages to work out what was wrong
Might be worth a look.

All sorted now, thanks guys. Spacers are 21 and 28mm which are different to the nc29 ones.