I've just fitted a chain and sprocket today and have tightened the adjuster up as much as possible but there is still an extreme amount of slack.
its that Chain and Sprocket set.
any ideas?
http://cgi.ebay.co.uk/VFR-400-R3-LM-NC3 ... 4aa567fd19
Nc30 chain & sprocket fitment
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
ChowderV4
- Site Supporter
- Posts: 454
- Joined: Mon Aug 03, 2009 10:16 pm
- Bike owned: 94 Fzr 400 3TJ ZXR400 Racer
- Location: Hayle, Cornwall
-
banoffee
- Site Supporter
- Posts: 1247
- Joined: Sat Aug 01, 2009 7:44 am
- Location: Surrey
- Contact:
Re: Nc30 chain & sprocket fitment
standard size sprockets?
have you moved the hub through 360 degrees?
might need to take a couple of links out if so
have you moved the hub through 360 degrees?
might need to take a couple of links out if so
attention 2 detail - bike valeting and more
-
ChowderV4
- Site Supporter
- Posts: 454
- Joined: Mon Aug 03, 2009 10:16 pm
- Bike owned: 94 Fzr 400 3TJ ZXR400 Racer
- Location: Hayle, Cornwall
Re: Nc30 chain & sprocket fitment
Chain 525 -108 links
15 tooth front
40 tooth rear
Thats what the new kit is and i was running the same before i changed it.
maybe it does have too many links, whats standard gearing and link count?
15 tooth front
40 tooth rear
Thats what the new kit is and i was running the same before i changed it.
maybe it does have too many links, whats standard gearing and link count?
-
arsey30
- Senior Member
- Posts: 1218
- Joined: Tue Apr 29, 2008 9:13 pm
- Bike owned: ftr223 650 bros
- Location: Surrey
Re: Nc30 chain & sprocket fitment
15/40 104 links.
Some suppliers give a standard length to cover various models.
I leave the adjuster in the existing position, then fit the chain to check length. [ in case I miscount number of links and remove too many
]
Dave.
Some suppliers give a standard length to cover various models.
I leave the adjuster in the existing position, then fit the chain to check length. [ in case I miscount number of links and remove too many
]Dave.
-
ChowderV4
- Site Supporter
- Posts: 454
- Joined: Mon Aug 03, 2009 10:16 pm
- Bike owned: 94 Fzr 400 3TJ ZXR400 Racer
- Location: Hayle, Cornwall
Re: Nc30 chain & sprocket fitment
alritey, cheers dave.
The father is coming up on the weekend with a grinder so we shall remove a few.
The father is coming up on the weekend with a grinder so we shall remove a few.