Hi guys,

What fasteners hold the Rad cover on? Is it just the black plastic panel snap clips like these:


http://cgi.ebay.co.uk/Panel-Snap-Rivet- ... 414a884d3c

Or screws? If so which ones?

Noticed earlier when I was stripping the bike down for the 1st time that there are no fastners whatsoever holding the rad cover in apart from the 2 small lugs.

if you mean the front v panel with the grill then the 3 lower fixiings are screws and captive clips on the lower fairings the four top fixings are similar to those ones. somebody else might confirm they will fit ? thats a good price for 10 posted.