Hi guys,
What fasteners hold the Rad cover on? Is it just the black plastic panel snap clips like these:
http://cgi.ebay.co.uk/Panel-Snap-Rivet- ... 414a884d3c
Or screws? If so which ones?
Noticed earlier when I was stripping the bike down for the 1st time that there are no fastners whatsoever holding the rad cover in apart from the 2 small lugs.
Radiator cover / fairings NC30
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Bumder
- Settled in member
- Posts: 16
- Joined: Mon Nov 29, 2010 11:01 am
- Bike owned: GSXR + VFR
- Location: KENT
-
Dynamohum
- Site Supporter
- Posts: 780
- Joined: Sun May 04, 2008 9:07 am
- Location: glasgow
Re: Radiator cover / fairings NC30
if you mean the front v panel with the grill then the 3 lower fixiings are screws and captive clips on the lower fairings the four top fixings are similar to those ones. somebody else might confirm they will fit ? thats a good price for 10 posted.