But where, oh where, to fit that pair of Hooterz I've had lying around for ages? Not exactly blessed with space under that nose cone

After a bit of trial and error I found a perfect spot. Drilled a 5mm hole in each brace plate on the nose cone bracket to fit the adaptor plates and Voila!

Silver clock bracket?

Is that not standard then?

no usually just black, a faded gloss black, but chances are its been sprayed at some ponit to maybe match an alloy frame?

Got proper airhorns with a compressor on my GSXR. Sounds superb and scares the crap out of sleepy car drivers!

id like one of these



http://www.youtube.com/watch?v=XvdjOsvBXFU

train airhorn

Stebel nautilus for the win.

Yep its been painted.

There black.



I'm thinking about one of these

Spoonman wrote:Stebel nautilus for the win.

I'm on a very tight budget, I don't have any income until the middle of December when my theatre tour finishes. I'm using what stuff I've accumilated over the years.

Anyway, it was tight enough fitting the Hooterz, never mind air horns and compressors

thunderace wrote:I'm on a very tight budget, I don't have any income until the middle of December when my theatre tour finishes. I'm using what stuff I've accumilated over the years.

Anyway, it was tight enough fitting the Hooterz, never mind air horns and compressors

True enough.

I've the Nautilus on my TL & the '24 (it's a hell of a squeeze alright). One of the better additions I've made to the bikes I have to say - very effective at waking up peds and drivers alike.