Hi
New to this board, just purchased a NC30 fully race prepped for track day use. the coolant expansion bottle has been removed and a plastic overflow bottle (one way) has been added - this mean I have no idea if there is enough coolant in the rad when I look in through the cap.
Anyone got a rule of thumb bit of advise where the coolant should reach if the bike is cold.
Cheers
NC coolant level for race bike
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
The Dark Prince
- Settled in member
- Posts: 36
- Joined: Fri Aug 06, 2010 3:14 pm
-
Drunkn Munky
- Site Supporter
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: NC coolant level for race bike
Top of the rad i always thought, The plastic bottle is just there for overflow.
-
skinnydog0_0
- NWAA Supporter
- Posts: 1212
- Joined: Tue Apr 20, 2010 9:07 pm
- Bike owned: Penny Farthing
- Location: Pembrokeshire West Wales
Re: NC coolant level for race bike
Drunkn Munky wrote:Top of the rad i always thought, The plastic bottle is just there for overflow.
I just fill my rad up till its just below the overflow pipe, run it and then empty any water from the overflow bottle.
An NC is for life, not just for Christmas!