vfr 400 nc30 rear banjo brake line bolt
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Site Supporter
- Reactions:
- Posts: 2304
- Joined: Sun Jul 04, 2010 1:21 pm
- Bike owned: nc30, nc35, gsxr750
- Location: Taunton
vfr 400 nc30 rear banjo brake line bolt
alright guys i need a banjo break light switch for my rear sets , what size is the bolt? iv found them for sale online but i dont know what size i need.
- ibby4585
- Site Supporter
- Reactions:
- Posts: 4776
- Joined: Tue Jun 16, 2009 1:42 pm
- Bike owned: SP's
- Location: oxfordshire
-
- Moderators
- Reactions:
- Posts: 9358
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: vfr 400 nc30 rear banjo brake line bolt
Thats the baby.
10 x 1.25 is the thread / pitch if you decide to source one from else where
10 x 1.25 is the thread / pitch if you decide to source one from else where
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
-
- Site Supporter
- Reactions:
- Posts: 2304
- Joined: Sun Jul 04, 2010 1:21 pm
- Bike owned: nc30, nc35, gsxr750
- Location: Taunton
Re: vfr 400 nc30 rear banjo brake line bolt
spot on , the rear sets have been sat in the garage for 6 weeks once i get this i can also get my new goodridge hoses on.
- porndoguk
- Site Supporter
- Reactions:
- Posts: 6406
- Joined: Wed Jun 16, 2010 11:17 pm
- Bike owned: NC30
- Location: Middle England
- Contact:
Re: vfr 400 nc30 rear banjo brake line bolt
i like the idea of this is it ok to use with the standard rear sets and remove the spring and switch?
- ibby4585
- Site Supporter
- Reactions:
- Posts: 4776
- Joined: Tue Jun 16, 2009 1:42 pm
- Bike owned: SP's
- Location: oxfordshire
Re: vfr 400 nc30 rear banjo brake line bolt
Yeah it looks a lot cleaner. you will need to pull the wires out of the original connecter and wiggle them back in the banjo one, you might need to cut a little bit of plastic from the connector to get the wires out but its worth the hassle as you keep the standard connectors.
Kris
Kris
- porndoguk
- Site Supporter
- Reactions:
- Posts: 6406
- Joined: Wed Jun 16, 2010 11:17 pm
- Bike owned: NC30
- Location: Middle England
- Contact:
Re: vfr 400 nc30 rear banjo brake line bolt
you got one on your kris?ibby4585 wrote:Yeah it looks a lot cleaner. you will need to pull the wires out of the original connecter and wiggle them back in the banjo one, you might need to cut a little bit of plastic from the connector to get the wires out but its worth the hassle as you keep the standard connectors.
Kris
they tolerant to a bit of heat ie without a head shield?
i removed the heat sheild last weekend and made a smaller alloy one just to cover the switch and master cylinder which is just hidden behind the rear set looks slick!
- ibby4585
- Site Supporter
- Reactions:
- Posts: 4776
- Joined: Tue Jun 16, 2009 1:42 pm
- Bike owned: SP's
- Location: oxfordshire
Re: vfr 400 nc30 rear banjo brake line bolt
I dont run a heatsheild on any of my bikes, they look horrible. just position the banjo wire on the outside of the frame. When you fit it you will see the banjo rubber joint kinda buts up against the frame so just run the wire over the frame where the two holes are for accessing the rear shock.
Kris
Kris
- Hadies
- Site Supporter
- Reactions:
- Posts: 1161
- Joined: Tue Mar 16, 2010 1:20 am
- Bike owned: NSR125, NC30, Daytona 675
- Location: Washington, Tyne and Wear
Re: vfr 400 nc30 rear banjo brake line bolt
I havent been running a rear brake light switch for the past few weeks. I normally only use my rear brake in conjunction with front so haven't been too desperate to fit my banjo switch
- porndoguk
- Site Supporter
- Reactions:
- Posts: 6406
- Joined: Wed Jun 16, 2010 11:17 pm
- Bike owned: NC30
- Location: Middle England
- Contact:
Re: vfr 400 nc30 rear banjo brake line bolt
anyone gots pics? especially with standard rear set to see how it fits?