big end bearing, oilpump chain NC30
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
leef82
- Site Supporter
- Posts: 165
- Joined: Wed May 12, 2010 5:21 pm
- Bike owned: vfr400 nc30
- Location: boston lincs
big end bearing, oilpump chain NC30
does any one know rougthly what the prices are for big end bearings are nc30, they seem to be o.k but if there cheap il replace em while the engine is stripped. also there seems to be some slack on the chain that drives the oil pump, is this norm?
-
vfrman
- Senior Member
- Posts: 1390
- Joined: Sat Apr 05, 2008 7:54 pm
- Bike owned: NC30, 1098s
- Location: Layton, Utah, USA
Re: big end bearing, oilpump chain NC30
A little slack is normal, you just don't want so much in there that it jumps off the cogs!