I have put a viper straight through exhaust on my NC30, it seems to be running fine, but do I need to re-jet or alter the fueling for it to get it spot on? Only an end can not a full system.
Cheers
Do I need to re-jet or anything for a slip-on exhaust?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Guy Montag
- Settled in member
- Posts: 6
- Joined: Mon Jun 07, 2010 5:07 pm
-
Cammo
- Site Supporter
- Posts: 4505
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
Re: Do I need to re-jet or anything for a slip-on exhaust?
I would leave it as is if it's running fine.
Gnereally the pilot screwsmight needsome tweaking to suit the exhaust, but again if it's running well best to leave it alone!
Gnereally the pilot screwsmight needsome tweaking to suit the exhaust, but again if it's running well best to leave it alone!
"It's just a ride" Bill Hicks