Fuel line

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
mattydrvf
Settled in member
Posts: 112
Joined: Wed Apr 22, 2009 10:38 pm
Bike owned: Rvf baby
Location: kent

Fuel line

Post by mattydrvf » Sat Jun 12, 2010 5:52 pm

Hi guys and girls fitting a new engine suppled by abrmoto (thanks again mate) just remembered when i took the old engine out months ago the small fuel line snapped off from the engine end. Now problem is i fitted new engine and just finished putting air box when i remembered this and for the life of me i cannot remember where the small line meets the engine or carbs. Can anyone let me know where this should go as i have a feeling its airbox and carbs off job again. Maybe a picture if anyone has one. many thanks in advance matt. :peace:

User avatar
skinnydog0_0
NWAA Supporter
NWAA Supporter
Posts: 1212
Joined: Tue Apr 20, 2010 9:07 pm
Bike owned: Penny Farthing
Location: Pembrokeshire West Wales

Re: Fuel line

Post by skinnydog0_0 » Sun Jun 13, 2010 10:38 am

Do you mean the thin hose form the fuel tap?
This thin hose is the vacume hose and goes on the cylinder head inlet. There should be a little brass tube on the inlet side of the head. i think it is on cylinder 3?
You may have to take the carbs off again, as i dont think you can get to the vacume tube.

mattydrvf
Settled in member
Posts: 112
Joined: Wed Apr 22, 2009 10:38 pm
Bike owned: Rvf baby
Location: kent

Re: Fuel line

Post by mattydrvf » Sun Jun 13, 2010 6:33 pm

Thankyou very much all found now and ready to get it all sorted

Post Reply