There is a small hole in the underside of my exhaust end can , it looks like it is supposed to be there. Is this a Honda gas-flow management thing and should it be plugged or not ?
Thanks.
OEM NC24 exhaust - hole in the underside of the can
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Old Painless
- Familiar Member
- Posts: 295
- Joined: Sat Apr 03, 2010 1:15 pm
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: OEM NC24 exhaust - hole in the underside of the can
Thats how it's supposed to be, It lets the water that condenses into the exhaust drain out :-)Old Painless wrote:There is a small hole in the underside of my exhaust end can , it looks like it is supposed to be there. Is this a Honda gas-flow management thing and should it be plugged or not ?
Thanks.
The collectorbox has similar holes.. However, these ones are plugged with bolts though.
Most Honda exhuast systems have small holes here and there to help drain water from them..
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...