I need 310MM discs for the nc30

theoutsider · Post by **theoutsider** » Thu Apr 22, 2010 11:34 am

I need some front discs with the diameter of 310 mm and the same bolt pattern.Where can I find or from what models I can buy them?Apparently the cbr600rr has 310 mm front discs but don`t know if they fit the nc30 front wheel.Let me know.Thanks

Post by **CMSMJ1** » Thu Apr 22, 2010 11:49 am

You have 2 options..

Buy some RC30 discs...they are the same fitment and 310mm

Or get a rotor kit in 310mm size from Stealth products..

Is this for a ZXR conversion?

theoutsider · Post by **theoutsider** » Thu Apr 22, 2010 11:54 am

yes it is

Post by **CMSMJ1** » Thu Apr 22, 2010 12:12 pm

Well...there you go!

I have Stealth rotors on my road bike and they are spot on. You can get a full set of discs for £195.

Is this for a road bike or race bike? If a race bike, might be woirth asking EBC if they have any RC30 discs in their sale (brakes4u)

There were some discs on ebay recently - they sold for £102 and they were Stealth...I nearly bought them

Post by **hunter** » Thu Apr 22, 2010 7:28 pm

I bought them CMSMJ1,free postage to.

RATMAN · Post by **RATMAN** » Sun Apr 14, 2013 10:27 am

CBR900 FIREBLADE DISCS FIT BUT ONLY 1998-99 AS THEY ARE 310MM AND THE 6 BOLT PATTERN THE SAME

Post by **micpec** » Sun Apr 14, 2013 10:22 pm

RATMAN wrote:CBR900 FIREBLADE DISCS FIT BUT ONLY 1998-99 AS THEY ARE 310MM AND THE 6 BOLT PATTERN THE SAME

DO NOT SHOUT, thanks

Post by **JC120** » Mon Apr 15, 2013 12:07 am

RATMAN wrote:CBR900 FIREBLADE DISCS FIT BUT ONLY 1998-99 AS THEY ARE 310MM AND THE 6 BOLT PATTERN THE SAME

You sure about that?

The NC's are 74mm PCD with a 58mm id, the 98 99 900rr is 78mm PCD, 62mm id, the CBR900 also has a different offset, 17mm for the NC to the 98/99 CBR900's 21mm.

BTW rotors from a 92/93 CB1000 (the big one) will work..

RATMAN · Post by **RATMAN** » Sat Apr 20, 2013 7:21 pm

hi thats what i was told but the more i look into it your right sorry

Post by **JC120** » Mon Apr 22, 2013 6:11 pm

No prob RATMAN. Here's a gem of a site from Australia that gives you a lot of those measurements for brake rotors. http://metalgear.com.au/searchByBikeModel.php

I need 310MM discs for the nc30

I need 310MM discs for the nc30

Re: I need 310MM discs for the nc30

Re: I need 310MM discs for the nc30

Re: I need 310MM discs for the nc30

Re: I need 310MM discs for the nc30

Re: I need 310MM discs for the nc30

Re: I need 310MM discs for the nc30

Re: I need 310MM discs for the nc30

Re: I need 310MM discs for the nc30

Re: I need 310MM discs for the nc30