Hey, all, I just joined the forum and I have a problem. I removed the TwoBro exhaust from my '93 NC30 a while back and am now trying to remount it. OMG. Total fail. I'm a two-stroke guy, WTF? I'm about to off myself.

If you've got one of these exhausts, or perhaps know how they are mounted, could you take a look at these photos and let me know if I've installed the rear pipes incorrectly?

http://www.divinia.com/people/sbowline/NC30/

I've got both ends very loosely attached to aid in alignment, and then I thought I'd work the rear pipes into the collectors and get them tightened to the head in stages. But I can't even get the right rear pipe into proper alignment. I'm not sure if I'm doing this all wrong or if there is _something_ wrong.

Many thanks!

I'll give ya a tenner for it

Na seriously thats a nice looking system you got there, obviously you've tried swapping the pipes around to see if that works? is it a full system? have you mixed up the front and rear down pipes?

Post some pics of the rest of the system and maybe we can figure it out?

Na seriously thats a nice looking system you got there, obviously you've tried swapping the pipes around to see if that works? is it a full system? have you mixed up the front and rear down pipes?

Yeah, I tried swapping the L/R rear pipes, but it looked even worse. I keep thinking I should try it again, but the way the L pipe bends around the shock looks right. If you need more pics, what would you like to see in order help figure this out?

get some pics of the front pipes, too be that far out you got to have something mixed up there

Ok, I think the problem is that I had the left and right pipes inserted into the wrong collector end. The cylinder ends were correct, but the pipes make a funny criss-cross. I'll post again and let you know how it goes, but this looks promising. Thank you!