Page 1 of 2
Where get 41/42 rear sproket for NC29 ?
Posted: Sat Dec 26, 2009 12:00 am
by PARUS
Does anybody know where to get 41 or 42 rear sprocket?
Re: Where get 41/42 rear sproket for NC29 ?
Posted: Sat Dec 26, 2009 1:00 am
by Polisher
Hi there,
Give b & C Express a shout, they do all the Renthals in all sizes, at reasonable prices
http://www.bandcexpress.co.uk/" onclick="window.open(this.href);return false;
Cheers, Neil
Merry Christmas and a Happy New Year
Re: Where get 41/42 rear sproket for NC29 ?
Posted: Tue Dec 29, 2009 12:29 am
by PARUS
I found that sprockets from CBR900 almost identical, only holes for mounting bolts 2.5mm bigger. All have diameter between mounting holes, all have same 525 size, but I can get 42 teeth for cbr900.
Here is size of NC29 sprocket
Here is size of cbr900 (1996 to 1999)
Will be appreciate any information about such conversion, because I like to try Supersprox rear sprocket.
Re: Where get 41/42 rear sproket for NC29 ?
Posted: Tue Dec 29, 2009 4:51 pm
by Wozza
Could you make a set of cylindrical spacers of OD 12.5mm, ID 10.5mm?
Re: Where get 41/42 rear sproket for NC29 ?
Posted: Wed Dec 30, 2009 12:05 am
by PARUS
Wozza wrote:Could you make a set of cylindrical spacers of OD 12.5mm, ID 10.5mm?
I'm thinking to make set of sprockets fixing bolts for OD 12.5mm. What I'm worrying about is the length between mounting holes.
Re: Where get 41/42 rear sproket for NC29 ?
Posted: Wed Dec 30, 2009 12:57 pm
by abrmoto
Can Rick Oliver not get these for you, worth a PM.
Re: Where get 41/42 rear sproket for NC29 ?
Posted: Wed Dec 30, 2009 1:03 pm
by PARUS
abrmoto wrote:Can Rick Oliver not get these for you, worth a PM.
I thought Rick sell only for VFR/RVF..
Re: Where get 41/42 rear sproket for NC29 ?
Posted: Wed Dec 30, 2009 1:11 pm
by CMSMJ1
PARUS wrote:abrmoto wrote:Can Rick Oliver not get these for you, worth a PM.
I thought Rick sell only for VFR/RVF..
Rick works at a Honda dealers too.....
Re: Where get 41/42 rear sproket for NC29 ?
Posted: Wed Dec 30, 2009 1:22 pm
by PARUS
CMSMJ1 wrote:PARUS wrote:abrmoto wrote:Can Rick Oliver not get these for you, worth a PM.
I thought Rick sell only for VFR/RVF..
Rick works at a Honda dealers too.....
I don't think Honda do sprockets for NC29 with 42/43 teeth. Ever jtsprockets haven't them listed on theirs site.
Re: Where get 41/42 rear sproket for NC29 ?
Posted: Wed Dec 30, 2009 2:18 pm
by justmartyn
Renthal do all sizes in 520 pitch. Speak to Graeme France for a good price.