How to Video: Replace Clutch Plates (NC30)

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Settled in member
Posts: 199
Joined: Sat May 03, 2008 6:42 pm
Bike owned: UK NC30 17" Rear.
Re: How to Video: Replace Clutch Plates (NC30)

Post by Sunnyday » Thu Aug 28, 2014 7:55 pm

I watched this video and it is fantastic I filled down the notches in the basket very lightly fitted honda friction plates and new steels along with a new clutch nut job done. when all fitted back the bike make sure the clutch releases evenly and not sticking before you box it all back up, I had faulty warped clutch springs that caused a judder I figured it out in the end.

NB TIP - If you are very handy with a angle grinder when you get your new clutch nut get a removal socket made out of a suitable old socket I did - just the job cos you will need one.

Post Reply