Electrical Problem On NC29

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
astroman
Settled in member
Posts: 16
Joined: Sun Nov 30, 2008 2:49 am
Bike owned: cbr400rr nc29 , 90 GSXR400SP
Location: Athens Greece

Electrical Problem On NC29

Post by astroman » Fri Nov 13, 2009 9:01 pm

I installed a used Wiring harness on my NC29 now when i start the bike.. it burns the starter replay fuse after 5 minutes of use... What can be the problem?

Also anyone know where can i find rebuild kit for my carbs? the left one leaks from the bowl... :roll:


thank you...
Top
leopard_pagan
Senior Member
Posts: 1184
Joined: Thu May 01, 2008 6:42 am
Bike owned: CBR400/600 Fighter
Location: Mildenhall-Suffolk
Contact:
Contact leopard_pagan

Re: Electrical Problem On NC29

Post by leopard_pagan » Fri Nov 13, 2009 9:05 pm

trouble with used parts are that you dont know how long they will last, or in some cases, if they will even work.

what you are going to have to do is check the loom closely for broken wires, wires shorting with other wires, burnt wires, corroded wires. check the fuses, check all earth points. bad earth cause lots of problems.
you will need to clean anything you find, you may need to cut off the bad and re-crimp the connections back on. re-wrap the harness.
a headache of a job..
Top
Post Reply

Return to “Honda - Workshop”