Temp gauge not working

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
davepm13
Settled in member
Posts: 45
Joined: Mon Dec 22, 2008 12:50 pm
Bike owned: 89 NC30 RWB and MC21SE
Location: Peterborough

Temp gauge not working

Post by davepm13 » Tue Jul 21, 2009 11:02 am

Hi all,

My temp gauge isn't working.

What's the most likely cause of this? Fan never seems to cut in but then maybe the sensor/switch on that's failed!!!

Any help gratefully accepted.

Dave.
Top
dar5150
Settled in member
Posts: 79
Joined: Mon Aug 11, 2008 3:53 am
Bike owned: NC35, SP-2.
Location: Eire

Re: Temp gauge not working

Post by dar5150 » Tue Jul 21, 2009 12:51 pm

Had the same problem myself. Turned out to be a loose wire coming from the thermostat. Their a good proceedure in the haynes manual for fault finding this system.
Top
davepm13
Settled in member
Posts: 45
Joined: Mon Dec 22, 2008 12:50 pm
Bike owned: 89 NC30 RWB and MC21SE
Location: Peterborough

Re: Temp gauge not working

Post by davepm13 » Tue Jul 21, 2009 1:51 pm

Thanks but I don't have a Haynes manual. It's on my list of things to get. Especially as I've spent a small fortune on the NC. Then again, haven't most of us!!!

Dave.
Top
Post Reply

Return to “Honda - Workshop”