NC30 ZXR front end conversion

robefumi08 · Post by **robefumi08** » Sat Jun 07, 2008 4:04 pm

I bought a complete front end project, RVF forks, ZXR 400 yokes and the complete kit to fit to an NC30. However i having problems with fitting has anyone done this, and or has pictures.

would be very much appreciated

thanks lee

Post by **tanuki** » Sun Jun 08, 2008 8:28 am

do the ZXR Yokes fit the RVF forks??

leggoo · Post by **leggoo** » Mon Jun 09, 2008 12:58 pm

Drop Rick Oliver a line and see if he can shed any light on this matter

Post by **mick.mh2racing** » Tue Jun 10, 2008 8:14 pm

What problems are you having? I'm doing a similar conversion, ZXR yokes and forks.

Post by **tanuki** » Wed Jun 11, 2008 1:21 pm

the reason I posted was...I believe there are some later model ZX6 forks (with radial brakes) that fit the ZXR4 yokes.

Soooo if the RVF forks fit the ZXR yokes it would be a super easy conversion to a radial front ended RVF.

IE...if the RVF forks fit the ZXR youkes it must also work the other way round...I could easlily fit ZXR4 forks on my RVF for example...therefore the ZX6 radial forks should aslo fit straight in.

Not an upgrade that I am aware that anybody has done on the RVF.

Post by **mick.mh2racing** » Thu Jun 12, 2008 8:07 pm

I reckon I've seen a radial front end on ebay in the last couple of weeks that was destined for an NC30 or 35. Might even have been here. If the forks fit the yokes, anything else's possible

NC30 ZXR front end conversion

NC30 ZXR front end conversion

Re: NC30 ZXR front end conversion

Re: NC30 ZXR front end conversion

Re: NC30 ZXR front end conversion

Re: NC30 ZXR front end conversion

Re: NC30 ZXR front end conversion