I must say i do like your little video guides
HRC carb upgrade
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Drunkn Munky
- Site Supporter
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: HRC carb upgrade
Looks nice how does it run with that r6 filter setup? you had it on the dyno?
I must say i do like your little video guides
I must say i do like your little video guides
-
Indiana Jones
- Site Supporter
- Posts: 141
- Joined: Mon Jul 20, 2009 8:48 am
- Bike owned: XT600Z,'10 TE250 ,XS650 chop
- Location: Faugheen
- Contact:
Re: HRC carb upgrade
That was last March,pre season.
Made a shade over 60hp with really good fueling.
Mid range was perfect.
The motor was well tired at that stage, completly gutless at the end of the season.
Hence the (hopefully) stronger motor now installed.
On a different note,I recently replaced a fuel pump on an Africa Twin with a Facet solid state unit.
Going to use the same on my new setup.
It's smaller,lighter and more reliable.
Anyone used this pump?
Made a shade over 60hp with really good fueling.
Mid range was perfect.
The motor was well tired at that stage, completly gutless at the end of the season.
Hence the (hopefully) stronger motor now installed.
On a different note,I recently replaced a fuel pump on an Africa Twin with a Facet solid state unit.
Going to use the same on my new setup.
It's smaller,lighter and more reliable.
Anyone used this pump?
-
Drunkn Munky
- Site Supporter
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: HRC carb upgrade
So which year R6 is the filter from, i might try one of them for my open carb setup.
It looks like its bolted through the original airbox mounts?
Never used one of them pumps but it only be better than an old zxr pump, will look trick too.
It looks like its bolted through the original airbox mounts?
Never used one of them pumps but it only be better than an old zxr pump, will look trick too.
-
Indiana Jones
- Site Supporter
- Posts: 141
- Joined: Mon Jul 20, 2009 8:48 am
- Bike owned: XT600Z,'10 TE250 ,XS650 chop
- Location: Faugheen
- Contact:
Re: HRC carb upgrade
It's not a BMC now that I surf the web.
It's off a carbed R6 00-02.
The stock item has a sponge type washable element with a mesh cage beneath.
The filter bolts straight on,just drill 2 holes in its lip.
It's off a carbed R6 00-02.
The stock item has a sponge type washable element with a mesh cage beneath.
The filter bolts straight on,just drill 2 holes in its lip.
-
gonzothegreat
- Site Supporter
- Posts: 200
- Joined: Wed May 26, 2010 10:32 pm
- Location: Hampton Wick - UK
Re: HRC carb upgrade
Between a NC30 HRC spec and a NC35 one, which one would you run and why?