False speedo readout

[phillcbr400]

lp can u please forward the templates to me, does your kit bypass the light trap?
ive still got to see if my nc29 is derestricted.

[leopard_pagan]

the dials dont bypass anything.
BUT if you are fitting the dials your self. you may as well while you have the speedo in your hands** also remove the disk that cuts the light trap beam = no need for a mod kit.

If your not fitting the dials then get who ever is to remove the disk for you.

** you must be careful when you dismantle the speedo out of the dash, it is a precision tool and can be damaged easily! i cocked up 2 speedos doing this!

need an email address bud...

[phillcbr400]

cheers lp, its phillcbr400@gmail.com
i'm not sure if mine has been done or not, but i'll look before i start taking it apart.
does your kit you sell on ebay derestrict the bike without having to mess inside the clocks?

[leopard_pagan]

"does your kit you sell on ebay derestrict** the bike without having to mess inside the clocks?"
> yes
you wont be able to "see" the light trap disk until you do dismantle the speedo out of its housing/dash. the only other way to test if its there is to get on a private road or track day and see if it goes over 112mph or not.. i wont be held responsible if you get caught! immediate ban if you get caught over 100mph!

** ONLY removes the 112mph/180kph limiter.

email heading your way with NC29 templates.....

[phillcbr400]

received, thankyou very much for that
well pretty sure it has been done then had at least 120 out of it, but its over reading slighty due to downgearing. do u know of any way to rectrify the reading, as i like the gearing it has.

[leopard_pagan]

not i sir. some thing i never got round to playing with.. but i know loads on here have.
start a new thread on it....