Carb- refitting, new rubbers, easy? is it f&*K!!!!
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
lukemillar
- Site Supporter
- Posts: 690
- Joined: Thu Aug 26, 2010 11:43 pm
- Bike owned: '89 NC30 Racebike #24
- Location: Wellington, New Zealand
Re: Carb- refitting, new rubbers, easy? is it f&*K!!!!
I'm having carb fitting hassles now as well. Last few times were fine and went on easily, however this time, I too have fitted new rubbers and they are being a real pain! The with the fronts seated, the rears are now only about 5mm out and I just can't seem to get them on!
The only other difference is I now have a HRC carb tray fitted, so visibility is somewhat obscured especially at the front.
Going to have another go at lunch today and warm up the rubbers as it is freezing here which I don't think is helping the cause!
The only other difference is I now have a HRC carb tray fitted, so visibility is somewhat obscured especially at the front.
Going to have another go at lunch today and warm up the rubbers as it is freezing here which I don't think is helping the cause!
-
lukemillar
- Site Supporter
- Posts: 690
- Joined: Thu Aug 26, 2010 11:43 pm
- Bike owned: '89 NC30 Racebike #24
- Location: Wellington, New Zealand
Re: Carb- refitting, new rubbers, easy? is it f&*K!!!!
Aaaaaand they're on! Phew, that was a really PITA. I swear it must be the cold or something because that was tough going by previous occasions