CAVEAT - this was measured using a (ahem) highly calibrated....plastic office rule, so give or take a mm but it should at least let you know if it is the right size.
nc30 swingarm removal
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
NGneer
- Site Supporter
- Posts: 794
- Joined: Wed Jan 21, 2009 7:37 am
- Bike owned: x3 NC30,Matchless G80s AJS16ms
- Location: Köln
Re: nc30 swingarm removal
Benny, I cannot access EBay from work anymore (bloody fun police) so cannot check the dimensions on the link I put up to the tool on EBay. Having said that I grabed my pucker Honda item on the way out this morning and have just measured it as below...
CAVEAT - this was measured using a (ahem) highly calibrated....plastic office rule, so give or take a mm but it should at least let you know if it is the right size.
CAVEAT - this was measured using a (ahem) highly calibrated....plastic office rule, so give or take a mm but it should at least let you know if it is the right size.
-
iDemonix
- Site Supporter
- Posts: 651
- Joined: Tue Aug 24, 2010 10:26 pm
- Bike owned: '92 NC30
- Location: Banbury, Oxfordshire
Re: nc30 swingarm removal
I didn't have an Abba stand, so when I rebuilt my bike and got to the swingarm (well I stripped to the frame to replace the engine so yeah...) I jacked up the entire bike, then put a plank across two jacks and put that under the sump - job done!
A roaring V4 is the summer soundtrack.