Thanks for the reply guys.
Yeh, once I was back in the garage I noticed that the horn, rear light/brake light, licence light all did not work but had head lights.
I hunted this problem down to the wiring for the digital gauge to the CDI rpm wire. I unexplicably had a small bit of exposed wiring from the gauge which were touching when I had wrapped it up. Fixed it, re-wrapped the wiring, switched the ignition on and the fuse did not blow, repeated this a few times to make sure and all was still good.
Makes sense to me now why the rpms were slightly unsteady during the ride, did not click in my head at all.
Fusebox probs...
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Posts: 244
- Joined: Fri Sep 17, 2010 1:06 pm
- Bike owned: NC35
- Location: Australia