nc24 no spark

[fringe80]

yeah tried it with both,, just the same thing happening!!!

[Neosophist]

The ignition system isn't complex, there must be something wrong somewhere, have you got the wiring diagram? It's easy enough to trace

[CMSMJ1]

I'll stick 20p on a kill switch failure...

[fringe80]

i'll try the 1 from my other bike and let u know 2morrow,, where should i post the 20p to mate!?!?!?

[fringe80]

ignition switch is fine,, it's must be the pickups!!
used multi-meter on everything and all good but nothing when i test the pickups!?!?
two different ones been on the bike and still nothing there!?!?
any help would be great please!?!?!?

[Neosophist]

What / how are you testing them?

You need to measure resistance, 400-500 ohms on the pickup coils.

Silly question but are you earthing the plug (holding it against the engine) when your cranking the bike over?

[fringe80]

multimeter, to be honest no sure what setting to put it on!!!but did try all setting on mine,, lost the booklet thou,,,

yeah when cranking i'm touching the plug against a nice shiny bolt on the engine!!

am i making a tit of myself and doing it all wrong!!!

Lee

[Neosophist]

Sounds about right, I put it on the rocker bolts of the cylinder head.. try that (also make sure the plug is in properly)

Put the meter on Ohms (resistance) if it's got a manual scale put it on 2000

Measure between the wires on the plug

[fringe80]

hi mate still no joy, could you explain how to check all the connectors for me please

[Neosophist]

Yep.

Firstly check the coils

Put the multimeter on Volts.. 20 if it's a manual meter.

Theres two wires to each coil, put the igntion on and measure between earth and each wire on the coils and see what you have...