The ring from Yamaha, but pistons looks like from another supplier... but which one - "than't is the question"....greggo wrote:I'm curious on this myself, the rings he had were Yamaha rings (although I've seen intercahngeability on rings between manufacturers on other bikes). Those pistons looked to have much shorter skirts than anything I have seen out of anything from the 90's.
Who's selling this engine ?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
PARUS
- Senior Member
- Posts: 1160
- Joined: Tue Apr 29, 2008 10:01 pm
- Bike owned: Already 20% of NC29...
- Location: Seattle, USA
- Contact:
Re: Who's selling this engine ?
-
PARUS
- Senior Member
- Posts: 1160
- Joined: Tue Apr 29, 2008 10:01 pm
- Bike owned: Already 20% of NC29...
- Location: Seattle, USA
- Contact:
Re: Who's selling this engine ?
In case I will fit bigger pistons I also need different rods. Correct ?
-
Spanners
- Settled in member
- Posts: 36
- Joined: Fri Nov 21, 2008 7:04 pm
Re: Who's selling this engine ?
Ah well the problem with going to 1mm o/s on the Honda is that as you state Honda dont make o/s pistons for it so if you did go 1mm over on any honda useing non gen pistons & the FZR400 ring sets that goes on them you would in fact be cheating.. That is if you wanted to race in Formula 400 in the uk ...........
-
vr46
- Site Supporter
- Posts: 294
- Joined: Sun Jun 15, 2008 1:42 pm
- Bike owned: All sorts
- Location: CUMBRIA
Re: Who's selling this engine ?
It's a bit frustrating when people go 1mm over... things like this never get checked at Club level.
Skint Novice F400
-
abrmoto
- Moderators
- Posts: 728
- Joined: Wed Apr 30, 2008 10:52 pm
- Bike owned: RVFx5,SP1,MV F3,C90,Firestorm
- Location: Wigan
- Contact:
Re: Who's selling this engine ?
A bitvr46 wrote:It's a bit frustrating when people go 1mm over... things like this never get checked at Club level.
-
PARUS
- Senior Member
- Posts: 1160
- Joined: Tue Apr 29, 2008 10:01 pm
- Bike owned: Already 20% of NC29...
- Location: Seattle, USA
- Contact:
Re: Who's selling this engine ?
Just wondering - what is adequate price for such engine ?
-
brooky
- Site Supporter
- Posts: 214
- Joined: Tue May 20, 2008 11:29 pm
- Bike owned: cbr400,vfr400,crf250,ktm200exc
- Location: Heysham
- Contact:
Re: Who's selling this engine ?
pissed me off for years!abrmoto wrote:A bitvr46 wrote:It's a bit frustrating when people go 1mm over... things like this never get checked at Club level.
Vinylmark signs - for all your bike, car, van, vinyl needs, one off tshirts also printed.
http://www.vinylmarksigns.co.uk" onclick="window.open(this.href);return false; email sales@vinylmarksigns.co.uk
http://www.vinylmarksigns.co.uk" onclick="window.open(this.href);return false; email sales@vinylmarksigns.co.uk
-
racesupplies
- Familiar Member
- Posts: 285
- Joined: Tue Jan 05, 2010 11:42 am
Re: Who's selling this engine ?
I bought it because its allowed in the Manx now.
-
PARUS
- Senior Member
- Posts: 1160
- Joined: Tue Apr 29, 2008 10:01 pm
- Bike owned: Already 20% of NC29...
- Location: Seattle, USA
- Contact:
Re: Who's selling this engine ?
I have spoken with seller. The engine done by RLR motors http://www.rlrmotorsports.com/ But keep silence about pistons...CMSMJ1 wrote:Bonus..so what make are those pistons?
-
racesupplies
- Familiar Member
- Posts: 285
- Joined: Tue Jan 05, 2010 11:42 am
Re: Who's selling this engine ?
I am waiting for the weather to get better,then I will get it in the workshop and have a look inside.Its got special cams as well.The pistons were made in America,check you tube Thundersports gb rockingham junior powerbikes.