Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Yakama
- Site Supporter

- Posts: 1369
- Joined: Wed Apr 30, 2008 5:27 pm
- Bike owned: NC23s, 29, 30s, MC16
- Location: Oban
Post
by Yakama » Sat Nov 28, 2009 11:41 pm
From the Jap4 website

Adjustable fork tops to give an extra 4mm preload and 20 clicks of rebound adjustment (will not work with 89 NC30 or and R spec NSR) £139.00
-
CMSMJ1
- Moderators

- Posts: 7152
- Joined: Thu May 01, 2008 9:42 am
- Bike owned: NC30-No9
- Location: Chesterfield, United Kingdom
Post
by CMSMJ1 » Fri Dec 04, 2009 2:16 pm
Does the 23 have rebound adjustment?
IMPERATOR REX ANGLORUM
The V4 is the law..
NC30 - No9 - my old mate
-
Wozza
- Site Supporter

- Posts: 629
- Joined: Wed Aug 06, 2008 9:51 pm
Post
by Wozza » Fri Dec 04, 2009 3:17 pm
NC23 has no damping adjustment, or even preload (just air pressure).
Why not just fit NC29/NC30 fork tops to give preload adjustment?
-
PARUS
- Senior Member
- Posts: 1160
- Joined: Tue Apr 29, 2008 10:01 pm
- Bike owned: Already 20% of NC29...
- Location: Seattle, USA
-
Contact:
Post
by PARUS » Fri Dec 04, 2009 9:10 pm
Yakama wrote:From the Jap4 website

Adjustable fork tops to give an extra 4mm preload and 20 clicks of rebound adjustment (will not work with 89 NC30 or and R spec NSR) £139.00
For that price I would fit CBR600RR forks.. or better change spring and oil..that simply fitting fork top.. Are they worth it price ?
-
Yakama
- Site Supporter

- Posts: 1369
- Joined: Wed Apr 30, 2008 5:27 pm
- Bike owned: NC23s, 29, 30s, MC16
- Location: Oban
Post
by Yakama » Sat Dec 05, 2009 12:46 am
Thanks guys. I am going to change the forks and oil. Already bought from mr France. Just wondered if these would fit
-
Wozza
- Site Supporter

- Posts: 629
- Joined: Wed Aug 06, 2008 9:51 pm
Post
by Wozza » Sat Dec 05, 2009 1:41 am
The springs and oil from GF will sort you out, get them fitted and check sag before deciding if you need/want preload adjusters.
-
w00dzy
- Site Supporter

- Posts: 514
- Joined: Sun Oct 12, 2008 10:44 pm
- Bike owned: Aprilia RSVR Mille
- Location: Hampshire
Post
by w00dzy » Sat Dec 05, 2009 8:14 am
I have some preload adjusters from an nc30 if your interested.. also the internals but they are slightly bent..
-
lloydiecbr
- Site Supporter

- Posts: 271
- Joined: Fri Dec 26, 2008 11:11 pm
- Bike owned: VTR1000
- Location: coventry
Post
by lloydiecbr » Sat Dec 05, 2009 11:08 am
if he dont want them .i will £cheep ya
