NC30 Captive wheel spacers

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
Spike16
Site Supporter
Site Supporter
Posts: 1670
Joined: Tue Apr 29, 2008 8:56 pm
Bike owned: NC30 Road, SV650 Race
Location: Hampshire, Wichester

NC30 Captive wheel spacers

Post by Spike16 » Wed Nov 25, 2009 10:18 pm

Hi im really curious as to how these work can anyone describe them or post some pictures

or better yet could someone post me some dimensioned pictures so I can make a set up
Top
User avatar
Drunkn Munky
Site Supporter
Site Supporter
Posts: 6313
Joined: Thu May 01, 2008 9:37 am
Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
Location: Kent

Re: NC30 Captive wheel spacers

Post by Drunkn Munky » Wed Nov 25, 2009 10:27 pm

I got the wheels off at the mo, i'll take some measurements and pics tomorrow for ya. They basically have a ridge running round the outside on the bearing side that sits inside the bearing rubber. Makes removing and re-fitting the wheel a lot easier as they dont fall out.
Top
User avatar
abrmoto
Moderators
Moderators
Posts: 728
Joined: Wed Apr 30, 2008 10:52 pm
Bike owned: RVFx5,SP1,MV F3,C90,Firestorm
Location: Wigan
Contact:
Contact abrmoto

Re: NC30 Captive wheel spacers

Post by abrmoto » Wed Nov 25, 2009 10:31 pm

Rick Oliver does them, bargain, unless you got to much time and lathe not worth making um, drop rick a line. Does NC30 and NC35.
Top
dar5150
Settled in member
Posts: 79
Joined: Mon Aug 11, 2008 3:53 am
Bike owned: NC35, SP-2.
Location: Eire

Re: NC30 Captive wheel spacers

Post by dar5150 » Fri Nov 27, 2009 1:09 pm

They really are a must if your racing. Saves so much messing around. Cheap as chips as well.
Top
User avatar
viper_biker
Moderators
Moderators
Posts: 1798
Joined: Sun Apr 06, 2008 11:25 am
Bike owned: VFR400RR, CBR1000RR6
Location: Belfast, Norn Iron
Contact:
Contact viper_biker

Re: NC30 Captive wheel spacers

Post by viper_biker » Fri Nov 27, 2009 4:41 pm

NC30 and NC35 aren't compatible with eachother though.
Ducati 916, not worth a carrott
Top
fastdruid
Regular Member
Posts: 893
Joined: Wed Apr 30, 2008 7:39 pm

Re: NC30 Captive wheel spacers

Post by fastdruid » Fri Nov 27, 2009 7:40 pm

Depends on the type but this for example is a set for the SV
Image

Druid
Top
Post Reply

Return to “Honda - Workshop”