hi there
can anyone help me with the correct valve clearance for an nc24, does the nc24 have shims??? and does anyone have a guide on doing the timing on the nc24??
thanks guys
nc24 valve clearance and timing
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
nc30 madness
- Settled in member
- Posts: 30
- Joined: Fri Oct 30, 2009 10:29 am
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: nc24 valve clearance and timing
The timing like on all the NC13e engines is fixed, you cannot adjust it. Unless the engines been in pieces it shouldn't need messing with.
The valves use the traditional lock-nut and screw adjuster so you dont' need to buy shims.
Read the valve clearance guide that is a sticky topic (first post) in this forum and you'll see a page i added about NC24 valve clearnaces
The valves use the traditional lock-nut and screw adjuster so you dont' need to buy shims.
Read the valve clearance guide that is a sticky topic (first post) in this forum and you'll see a page i added about NC24 valve clearnaces
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...