NC29 side stand question

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
zul_cbr
Settled in member
Posts: 199
Joined: Mon May 26, 2008 1:39 am
Bike owned: 1990 CBR400RR-L NC29
Location: Malaysia
Contact:
Contact zul_cbr

NC29 side stand question

Post by zul_cbr » Thu Nov 05, 2009 6:09 am

hi all

my bike recently had a problem with the stand switch (seems like the intermittent connection). how to disable the switch but keep the indicator functioning ?

based on the wiring diagram, there is a 3 wires coming out from the stand switch.
GREEN - ground
YELLOW/BLACK - indicator
GREEN/WHITE - ignition control unit (cdi)

what happen if i cut the GREEN/WHITE wire ? btw, i'm no good in electrics. :lol:

thanks in advance.
Top
PARUS
Senior Member
Posts: 1160
Joined: Tue Apr 29, 2008 10:01 pm
Bike owned: Already 20% of NC29...
Location: Seattle, USA
Contact:
Contact PARUS

Re: NC29 side stand question

Post by PARUS » Thu Nov 05, 2009 11:29 am

Just connect YELLOW/BLACK and GREEN/WHITE and your switch always will be switch on. But I think you can simple clear switch inside.
Top
zul_cbr
Settled in member
Posts: 199
Joined: Mon May 26, 2008 1:39 am
Bike owned: 1990 CBR400RR-L NC29
Location: Malaysia
Contact:
Contact zul_cbr

Re: NC29 side stand question

Post by zul_cbr » Thu Nov 05, 2009 3:43 pm

thanks Parus ;)
Top
Post Reply

Return to “Honda - Workshop”