Hi all. just blown up me 30 motor at manx gp and have got a 35 one comining over in next day or so. Is it just the pulser pickups i need to cha.nge or do i need to chance timing wheel 2 if u get me? Am using nc30 loom?
Cheers Jules
wot do i need to change to fit a 35 motor in a 30?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Jules
- One Hit Wonder
- Posts: 1
- Joined: Thu May 29, 2008 7:25 am
- Bike owned: Nc 30 race bike.
- Location: Isle of man
-
Cammo
- Site Supporter
- Posts: 4505
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
Re: wot do i need to change to fit a 35 motor in a 30?
Not sure of what needs to be changed with the pickups, I used a rvf loom and cdi.
You'll need to tap 2 holes in the engine to fit into the 30 frame, they're 10x1.25 (fine).
You'll need to tap 2 holes in the engine to fit into the 30 frame, they're 10x1.25 (fine).
"It's just a ride" Bill Hicks