Removing 33 bhp restrictors

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
dave6970
Settled in member
Posts: 27
Joined: Wed Apr 30, 2008 7:42 pm
Bike owned: SP-1, NC30
Location: East Sussex

Removing 33 bhp restrictors

Post by dave6970 » Tue Mar 31, 2009 7:48 pm

A friend of mine has just bought a tatty L reg NC30 with a 33bhp restrictor kit fitted to it.
We need to remove it to get it full power again ,where will it be.
Is it in the airbox ,carbs or electronically done ?

User avatar
simmo
Familiar Member
Posts: 307
Joined: Tue Apr 29, 2008 8:58 pm
Bike owned: nc30 road & zxr400 race
Location: Leicester
Contact:

Re: Removing 33 bhp restrictors

Post by simmo » Tue Mar 31, 2009 9:16 pm

whip the carbs off, and there will be a washer in each of the inlet rubbers. they are your restrictors, take them out, and fit the carbs. Job Done!!

User avatar
TheRehabKid
Site Supporter
Site Supporter
Posts: 67
Joined: Wed Apr 30, 2008 11:49 pm
Location: Washington (North East)

Re: Removing 33 bhp restrictors

Post by TheRehabKid » Tue Mar 31, 2009 9:38 pm

As said above, they just sit in each of the inlet rubbers once the carbs are off.
Don't mean to be cheeky... but any chance he'd be selling them once they're out?
Just i need some!

3g_nitro
Settled in member
Posts: 2
Joined: Mon Mar 30, 2009 6:00 pm

Re: Removing 33 bhp restrictors

Post by 3g_nitro » Thu Apr 02, 2009 8:14 am

hey,

I just recently got my nc30 91.. my insurance company are asking for a restricted certificate,or conformation the bike is restricted to 33 bhp :evil: as im still under 21 :D

Does any body, know what type of certificate to give, without actually restricting it.. or do i have to tke it to the garage and tell dem to put it in????

Or has any body restricted it (legitly) and send me a copy of there certificate?? plzz..

User avatar
TheRehabKid
Site Supporter
Site Supporter
Posts: 67
Joined: Wed Apr 30, 2008 11:49 pm
Location: Washington (North East)

Re: Removing 33 bhp restrictors

Post by TheRehabKid » Thu Apr 02, 2009 12:59 pm

you'll need to get it restricted, once the restrictors are in get it on the dyno and the readout will prove it's only 33bhp, then send the printout to your insursance company, certificate has to be specific to your bike.

User avatar
CMSMJ1
Moderators
Moderators
Posts: 7152
Joined: Thu May 01, 2008 9:42 am
Bike owned: NC30-No9
Location: Chesterfield, United Kingdom

Re: Removing 33 bhp restrictors

Post by CMSMJ1 » Thu Apr 02, 2009 1:57 pm

this old chesnut about 33bhp and insurance too...if you are on an A1 licence then just man up, ride the bike within the law and learn to go around corners...then when you are legally allowed, sell the washers, get a tank of fuel and go and enjoy the new feeling bike.

does my fruit all this invalid insurance bollocks :Rulez: :Soap:
IMPERATOR REX ANGLORUM

The V4 is the law..

NC30 - No9 - my old mate

dave6970
Settled in member
Posts: 27
Joined: Wed Apr 30, 2008 7:42 pm
Bike owned: SP-1, NC30
Location: East Sussex

Re: Removing 33 bhp restrictors

Post by dave6970 » Thu Apr 02, 2009 5:13 pm

Yes TheRehabKid i am sure he will sell them to you when they are removed.
He is hoping to do it at the weekend.
I will pm you when they are out.
Would not have a clue what they are worth, cant be much ?

User avatar
TheRehabKid
Site Supporter
Site Supporter
Posts: 67
Joined: Wed Apr 30, 2008 11:49 pm
Location: Washington (North East)

Re: Removing 33 bhp restrictors

Post by TheRehabKid » Thu Apr 02, 2009 10:42 pm

thanks dave but another forum member generously gave me some ;) mine ARE staying in the bike btw.
as for selling, on here most people know they're worthless but on ebay some just went for £15, £40 with a certificate to prove they're legit washers.

Post Reply