Hi guys - hope you can help.
I am rebuilding a NC24, and I just found out that two of the carburettor diaphragms were ruptered, and the other two look and feel like they will break soon.
Does anyone know where I can get replacements?
Regards, SuNk
carburettor diaphragms, NC24
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
SuNk
- Settled in member
- Posts: 6
- Joined: Mon Aug 11, 2008 3:24 am
- Location: Northern Denmark
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: carburettor diaphragms, NC24
Hi there, it is a discontinued part and only comes as a complete assembly with the slider, there is no part number listed for just the diaphram.
The Part# will vary depending on the set of carbs but will be either of:
16111-ml0-721
16111-ml0-724
The 724 revision is the safest bet as only very early 24's came with the 721 variant.
David Silver Spares has 1 in stock at £29.00 Here
CMSNL (Classic Motorcycle Spares Netherlands) Have 1 in stock at 115 euro!! Here
The cheapest option would be a 2nd hand set of carbs off ebay etc.
Hope that helps :D
The Part# will vary depending on the set of carbs but will be either of:
16111-ml0-721
16111-ml0-724
The 724 revision is the safest bet as only very early 24's came with the 721 variant.
David Silver Spares has 1 in stock at £29.00 Here
CMSNL (Classic Motorcycle Spares Netherlands) Have 1 in stock at 115 euro!! Here
The cheapest option would be a 2nd hand set of carbs off ebay etc.
Hope that helps :D
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
-
hunter
- Site Supporter
- Posts: 1292
- Joined: Thu Nov 20, 2008 1:09 pm
Re: carburettor diaphragms, NC24
look in, the parts and clothing for sale and wanted section,beardsroad has some second hand slides for sale.
-
SuNk
- Settled in member
- Posts: 6
- Joined: Mon Aug 11, 2008 3:24 am
- Location: Northern Denmark
Re: carburettor diaphragms, NC24
Thank you for the replies.
I found out that http://www.nrp-carbs.co.uk" onclick="window.open(this.href);return false; can make new diaphragms by copying the originals, so I will probably go by that route.
- SuNk
I found out that http://www.nrp-carbs.co.uk" onclick="window.open(this.href);return false; can make new diaphragms by copying the originals, so I will probably go by that route.
- SuNk
-
beardsroad
- Settled in member
- Posts: 3
- Joined: Thu May 01, 2008 9:59 am
Re: carburettor diaphragms, NC24
i can do you a set of slides with diaphrams and factory pro needles for £20.