NC30 Remove rear Lower engine mounting bolt

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
ebachs10
Settled in member
Reactions:
Posts: 2
Joined: Sun Feb 04, 2018 11:51 am
NC30 Remove rear Lower engine mounting bolt

Post by ebachs10 » Sat Mar 23, 2019 6:49 am

Hi All

I'm troubling removing the rear lower engine mounting bolt and hope you can help me out, solving the problem.
I have removed the nut on the lefthand side and the castle nut on the righthand side.

Can I hammer it out from the left side of the bike or is it screwed into the frame? (It is not clear to me, via the manual).

Thnaks in advance!

Pictures:
https://ibb.co/ct31GBD
https://ibb.co/0XJmhzF
https://ibb.co/CQb3mXy

/Esben
Top
vic-vtrvfr
Site Supporter
Site Supporter
Reactions:
Posts: 905
Joined: Tue Feb 14, 2012 9:12 pm
Bike owned: NC30 x4, VTR1000 Firestorm
Location: Co Down
Re: NC30 Remove rear Lower engine mounting bolt

Post by vic-vtrvfr » Sun Mar 24, 2019 11:59 pm

Put the nut back on a few threads and hit it a smack with the hammer to loosen it up. Hitting the pin directly will damage the threads
Top
User avatar
Tim400GB
Site Supporter
Site Supporter
Reactions:
Posts: 1168
Joined: Mon Jan 04, 2010 7:24 pm
Bike owned: 1 x NC30, 2 x NC32.5,
Location: SE Greater London
Re: NC30 Remove rear Lower engine mounting bolt

Post by Tim400GB » Mon Mar 25, 2019 10:24 am

Get some penetrating fluid too, dont want to be doom and gloom but Ive helped a friend cut one of those out before
Top
Post Reply

Return to “Honda - Workshop”