NC24 - forks - seal stopper ring

[radarro]

Hi,
Got an issue to finish front forks seal replacement.
Previous owner trashed away seal stopper rings in both forks. Don't ask me why...

Tried to find ones over Net, but no success so far. Asked Honda dealer, Wemoto and CMSNL, all say part no more in production/not available.

To the point:
OEM # 51447 KA3 004 – SNAP ring
Forks diam 37mm
Snap ring outer diam 50mm

What alternative rings can I use? Do U know if there's any official Honda replacement for this part?
Would these for VFR 700/750 RC24 or VT 500 early CBR 600 fit well? (Net says all have 37mm forks)
51447KR6003
or 51447461003

Thanks a lot!

[hunter]

Have you tried here.
http://www.partzilla.com/parts/detail/h ... oCjEfw_wcB

[radarro]

I was lucky to get one OEM 51447 KA3 004 ring.
Plus ordered other one 51447KR6003 - inner diam 37mm, OD - 54,5mm, H= 1,5mm. Hope this will fit, especially OD side.

Also - thought that fork seals 50x37x11 will fit NC24, but failed after first trials. Just ordered proper ones (dimensions 49x37x8,5/9 from Kyoba). Hope they will keep 8 PSI pressure.