nc35 : jetting help. with dynochart

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
Bike_Nut
Settled in member
Posts: 180
Joined: Sun Oct 19, 2008 6:48 pm

Re: nc35 : jetting help. with dynochart

Post by Bike_Nut » Tue Nov 25, 2008 12:52 am

Looking at my dyno graph the AF ratio max and min lines are at 12.5 and 13.5 for max power. I dont think you are that far off (mine was much richer mostly 11 and was losing me power) What is interesting is that even though my power was down on yours the shape was a bit better up top. Are you sure there is not something else messing up your top end?
Top
User avatar
Cammo
Site Supporter
Site Supporter
Posts: 4505
Joined: Thu May 01, 2008 12:35 am
Bike owned: NC30
Location: Melbourne, Australia

Re: nc35 : jetting help. with dynochart

Post by Cammo » Tue Nov 25, 2008 1:09 am

stevie wrote:the "A" needles would probably be best as they are the leaner of the three choices, it will be main jets and needle taper you need to get rite.
The 'A' needles have the thinnest diameter, they are the richest ones. The 'C' needles are leanest.
"It's just a ride" Bill Hicks
Top
stevie
Settled in member
Posts: 61
Joined: Mon Aug 04, 2008 7:08 pm
Bike owned: 92 uk model nc30
Location: aylesbury
Contact:
Contact stevie

Re: nc35 : jetting help. with dynochart

Post by stevie » Wed Nov 26, 2008 6:54 pm

thanks thats probably why it took me so long to get a good set up. lol. i stand corrected. iv never actualy put callipers on them i just took someones word on it as they had the same set up on there reace bike.
Top
Post Reply

Return to “Honda - Workshop”