When fitting R&G frame/fairing protectors...

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
manicguitarist
NWAA Supporter
NWAA Supporter
Posts: 353
Joined: Mon Oct 06, 2014 11:39 am
Bike owned: RVF400 (NC35)
Location: Rossendale, Lancashire

When fitting R&G frame/fairing protectors...

Post by manicguitarist » Fri Oct 17, 2014 6:43 pm

...the non fairing modification type...

Do take care with the routing of the cable from the sidestand...

I managed to crush mine ... :oops:

The bike worked but the side stand light wouldn't go out.

On investigation one wire had its insulation cut and was shorting out against the frame.

Insulating heat shrink applied...all is well. :oops:

Neosophist
Moderators
Moderators
Posts: 8172
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954

Re: When fitting R&G frame/fairing protectors...

Post by Neosophist » Fri Oct 17, 2014 9:37 pm

i take it this is to an RVF then :)
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...

manicguitarist
NWAA Supporter
NWAA Supporter
Posts: 353
Joined: Mon Oct 06, 2014 11:39 am
Bike owned: RVF400 (NC35)
Location: Rossendale, Lancashire

Re: When fitting R&G frame/fairing protectors...

Post by manicguitarist » Fri Oct 17, 2014 9:49 pm

Yes it is. Curious though - how did you know?

Loudandproud205
Settled in member
Posts: 16
Joined: Mon Aug 11, 2014 2:20 pm
Bike owned: VFR400R3 NC30 NSR125R JC20
Location: Market Rasen

Re: When fitting R&G frame/fairing protectors...

Post by Loudandproud205 » Sat Oct 18, 2014 12:25 am

NC30 doesn't have a kick stand light, or if it does mine doesn't work.

User avatar
lukemillar
Site Supporter
Site Supporter
Posts: 690
Joined: Thu Aug 26, 2010 11:43 pm
Bike owned: '89 NC30 Racebike #24
Location: Wellington, New Zealand

Re: When fitting R&G frame/fairing protectors...

Post by lukemillar » Sat Oct 18, 2014 3:46 am

and it is written under his username on the left! ;)

manicguitarist
NWAA Supporter
NWAA Supporter
Posts: 353
Joined: Mon Oct 06, 2014 11:39 am
Bike owned: RVF400 (NC35)
Location: Rossendale, Lancashire

Re: When fitting R&G frame/fairing protectors...

Post by manicguitarist » Sat Oct 18, 2014 10:06 am

Oh yeah.
D'uh!
:)

Post Reply