NC29 Hoses

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
CBR400RR_Repsol
Settled in member
Posts: 41
Joined: Sun Feb 17, 2013 11:49 pm

NC29 Hoses

Post by CBR400RR_Repsol » Fri Sep 19, 2014 12:04 am

Hi all

Rebuild progresses...slowly :roll: questions about fuel and brake reservoir hoses for my NC29. What size diameter am I looking for both hoses?

Fuel line I think has been posted on here before as 8mm? Is this correct?

Brake reservoir hoses I've no idea. Brembo do a 6mm on eBay and there's some on DemonTweeks that's 8mm but neither are specifically listed as for the NC29?

Thanks all :peace:
KC
Top
Gimly56
Familiar Member
Posts: 260
Joined: Thu Aug 30, 2012 10:47 pm
Bike owned: NC29 CBR400RR
Location: New Zealand

Re: NC29 Hoses

Post by Gimly56 » Sat Sep 20, 2014 8:58 am

Fuel hose specs - Internal diameter is 9mm, hose is 15mm thick all up....wall of hose is 3mm. So an 8mm hose should be fine.

Not sure about brake reservoir hose sorry. I replaced mine a long time ago but can't for the life of me remember?? I didn't purchase it online, I just bought a short length of hose from a hydraulics store.
Last edited by Gimly56 on Sun Sep 21, 2014 11:37 am, edited 1 time in total.
Top
Noodles
Settled in member
Posts: 31
Joined: Wed Jul 11, 2012 8:47 pm
Bike owned: GSXR1000K3 NSR125 CBR400NC29
Location: Nr Hull

Re: NC29 Hoses

Post by Noodles » Sat Sep 20, 2014 7:11 pm

I used 8mm cotton braided between the front master cylinder and reservoir.
Top
Post Reply

Return to “Honda - Workshop”