so my NC30 is all MOT'd taxed and "on the road" for the 1st time since i got it, the carbs have been cleaned by me and its had a service, new oil filter etc.
I've fitted a brand new reg rec and battery too.
now when I take it out for a run, it starts first time, with 1/2 choke for the 1st min or so then just idles nicely with no choke.
I get about 5 mins into a ride then the bike starts to lose power, and tails off until it cuts out completely.
so I switch off, leave it for 5 mins and it starts up again like nothing has happened.
this has happend the last 2 times I took it out, does anyone have any ideas what could be causing it?
NC30 cutting out
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
hunter
- Site Supporter
- Posts: 1292
- Joined: Thu Nov 20, 2008 1:09 pm
Re: NC30 cutting out
Vacuum pipe on the petrol tap,
Check that you have put in the right position on the tap,
It's a common mistake made by many.
Check that you have put in the right position on the tap,
It's a common mistake made by many.
-
jimmytanko
- Settled in member
- Posts: 80
- Joined: Fri Oct 25, 2013 11:38 pm
Re: NC30 cutting out
going to have a proper look tonight and check all the hoses are in the right place etc.hunter wrote:Vacuum pipe on the petrol tap,
Check that you have put in the right position on the tap,
It's a common mistake made by many.
does anyone know where I can get new vacuum hose from by any chance please?
-
Triplespeed
- Site Supporter
- Posts: 102
- Joined: Mon Jul 09, 2012 6:33 am
- Bike owned: Nc30, CBR600
- Location: Sittingbourne, kent
Re: NC30 cutting out
I'm pretty sure rick Oliver still sells them as I got a vacuum hose from him. The list is on the v4 general page at the topjimmytanko wrote:going to have a proper look tonight and check all the hoses are in the right place etc.hunter wrote:Vacuum pipe on the petrol tap,
Check that you have put in the right position on the tap,
It's a common mistake made by many.
does anyone know where I can get new vacuum hose from by any chance please?
-
jimmytanko
- Settled in member
- Posts: 80
- Joined: Fri Oct 25, 2013 11:38 pm
Re: NC30 cutting out
cheers I'll have a lookTriplespeed wrote:I'm pretty sure rick Oliver still sells them as I got a vacuum hose from him. The list is on the v4 general page at the topjimmytanko wrote:going to have a proper look tonight and check all the hoses are in the right place etc.hunter wrote:Vacuum pipe on the petrol tap,
Check that you have put in the right position on the tap,
It's a common mistake made by many.
does anyone know where I can get new vacuum hose from by any chance please?
-
jimmytanko
- Settled in member
- Posts: 80
- Joined: Fri Oct 25, 2013 11:38 pm
Re: NC30 cutting out
any idea on the size of the vacuum hose please anyone?