NC30 Indicators wont work!! (PLEASE HELP!!!)

Post by **Cal Walker** » Mon Jun 09, 2014 2:37 pm

Hi guys,

Just been out in the garage swapping over a duff left hand switchgear, as mine had melted the white wire connection in the brown plug. (previous owner bodged a 55/60 bulb in it)

So I've just swapped it over, connected it all up and tested it with the ignition on. My headlights now work on all settings, but now my indicators don't work when you hit the switch left or right!!??

I tested the indicators before I took the old one off and they worked perfectly fine! But now I've swapped it over.....Nothing!? When you hit the switch left or right you do hear a tick under the seat unit which I assume is the relay.

Also what is the correct relay to be used for a Jap NC30? just do I can make sure the correct one is actually on the bike

If anybody can please help me......I would be very grateful!

Cheers....Cal