I'm just about to order a swing arm tool and the engine tool from a guy on ebay but he say the swingarm tool is 38mm dia with 6 mm gaps.
I have just measured mine and it is 38mm dia but i have 10mm gaps !
Can some please check theirs just to confirm either way
cheers in advance
Dimensions clarification
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
carpman
- NWAA Supporter
- Posts: 181
- Joined: Sat Jul 17, 2010 9:18 pm
- Bike owned: 1990 nc30
- Location: Se London
-
arsey30
- Senior Member
- Posts: 1218
- Joined: Tue Apr 29, 2008 9:13 pm
- Bike owned: ftr223 650 bros
- Location: Surrey
Re: Dimensions clarification
The S/A peg spanner has 10mm pegs, the engine mount one has 6mm pegs [nearer 5mm actually]
The 38 x 6mm fits RC30 castle nut and can be used on NC30 but does not locate as well
The 38 x 6mm fits RC30 castle nut and can be used on NC30 but does not locate as well
-
carpman
- NWAA Supporter
- Posts: 181
- Joined: Sat Jul 17, 2010 9:18 pm
- Bike owned: 1990 nc30
- Location: Se London
Re: Dimensions clarification
cheers for the infoarsey30 wrote:The S/A peg spanner has 10mm pegs, the engine mount one has 6mm pegs [nearer 5mm actually]
The 38 x 6mm fits RC30 castle nut and can be used on NC30 but does not locate as well
I had a chat on the phone with the guy that makes and sells them to check on his dimensions and all is sorted now awaiting my 2 new tools