NC30 Rear Hub Collar
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
weenor
- Settled in member
- Posts: 3
- Joined: Mon Apr 07, 2014 5:46 pm
NC30 Rear Hub Collar
I bought my NC30 in basket case condition. When rebuilding the rear hub with new bearings etc, I cannot find the spacer/collar that sits into the seal and hub before the sprocket carrier fits, can anyone help, or supply a part number ? Cheers.
-
carpman
- NWAA Supporter
- Posts: 181
- Joined: Sat Jul 17, 2010 9:18 pm
- Bike owned: 1990 nc30
- Location: Se London
Re: NC30 Rear Hub Collar
Try here http://www.cmsnl.com/honda-vfr400_model1258/partslist/
Here the swing arm schematic http://www.cmsnl.com/honda-vfr400_model1258/partslist/
Here the swing arm schematic http://www.cmsnl.com/honda-vfr400_model1258/partslist/
-
megawatt
- Settled in member
- Posts: 8
- Joined: Mon Feb 17, 2014 6:38 pm
Re: NC30 Rear Hub Collar
If you can't buy one, post up a drawing with dimensions and I'll see if I can make one ?
-
weenor
- Settled in member
- Posts: 3
- Joined: Mon Apr 07, 2014 5:46 pm
Re: NC30 Rear Hub Collar
Thanks for your replies, I will check out cms for replacement part. Thanks for offering to make a new part, but the problem is that I don't know the correct size i.e. not sure exactly where the hub sits....if that makes any sense ??