can any1 tell me if i can use the pulse coil from a nc30 on nc35??? before any1 says i know there are 2 on the 30 and 1 on the 35 just need to know if i can just use the top 1.
cheers rick72
nc30 pulse coil on nc35
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
rick72
- Settled in member
- Posts: 7
- Joined: Mon Nov 03, 2008 5:21 pm
- Bike owned: NC30 Race GSXR1100 XR600 ER6
-
CMSMJ1
- Moderators
- Posts: 7152
- Joined: Thu May 01, 2008 9:42 am
- Bike owned: NC30-No9
- Location: Chesterfield, United Kingdom
Re: nc30 pulse coil on nc35
pretty sure you cannot - the pulse generation and CDI/tacho is all different on the 30/35.
If you are talking to just use the NC30 HW on the 35 - dunno....get it plumbed in and let us know :)
If you are talking to just use the NC30 HW on the 35 - dunno....get it plumbed in and let us know :)
IMPERATOR REX ANGLORUM
The V4 is the law..
NC30 - No9 - my old mate
The V4 is the law..
NC30 - No9 - my old mate
-
Cammo
- Site Supporter
- Posts: 4505
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
Re: nc30 pulse coil on nc35
If you just mean the pulse coil component alone then I don't see why it wouldn't work, it's not much more than a magnet surrounded by copper wires with leads.
Let us know.
Let us know.
"It's just a ride" Bill Hicks