Gold nissin calipers upgrade

alexandervf · Post by **alexandervf** » Sun Mar 30, 2014 5:54 pm

Hi everyone,

I'm about to install the (taken from a 2004 cbr600) nissin gold calipers.

Do i also have to replace the front brake master cylinder in order for the calipers to function adequately? or will the stock m/c do just fine?

Thanks

alexandervf · Post by **alexandervf** » Sun Mar 30, 2014 7:18 pm

Sorry, i rushed. Did a search and found the answers i was looking for....

Thanks

Post by **iDemonix** » Mon Mar 31, 2014 8:50 pm

Pop a link to the answer in case anyone stumbles upon this page from the search box/Google with the same question :)

alexandervf · Post by **alexandervf** » Tue Apr 01, 2014 8:47 am

viewtopic.php?f=24&t=38450&hilit=nissin+calipers+cbr600+nissin+calipers&start=10

A good thread on this matter. Gold nissin calipers upgrade is a good upgrade for the nc35. I do not know if this applies for the nc30 too.

Post by **speedy231278** » Tue Apr 01, 2014 10:24 am

You can fit them to the NC30, however to do so requires an intermediate bracket to go between the caliper and fork leg.

Gold nissin calipers upgrade

Gold nissin calipers upgrade

Re: Gold nissin calipers upgrade

Re: Gold nissin calipers upgrade

Re: Gold nissin calipers upgrade

Re: Gold nissin calipers upgrade