12mm inline fuel filter...any ideas?

[Neosophist]

Is that the outside or the inside diameter you're measuring?

It's an NC24, 12mm is correct.

I forget where I got the one I used from, perhaps it was a car filter but I took it off in the end. dont remember it casuing any trouble but it wastn needed and made hooking up tank even more fiddly.

[rumpoldstilskin]

Ism convinced 25 years worth of crud is getting into carbs from tank (yes I know there is a mesh style filter in tank)and want to run an inline filter from tank to carbs. Problem is I am struggling to find a reasonably priced fuel filter that will fit the bill. Inlet/outlet to fuel filter needs to be 12mm and filter itself needs to fit nicely under tank. Any ideas anybody?

I'm assuming you have an NC24? Mine was 12mm on that, got a glass cartridge one off eBay. About £8. Worked fine but was a pain to fit as it's a tight space underneath and the filter is about 4.5" long overall. Clean the tank out and then line it with tank liner, maybe have the carbs sonically cleaned?

[rumpoldstilskin]

I should really read all the posts first :/