nc30 clutch modification

NC30Dubz · Post by **NC30Dubz** » Mon Oct 14, 2013 2:51 pm

Hi guys, I'm having a bit of an issue with my clutch nut adjuster. It will never stay in the same place and this is the second one I've had on my bike. Is there any sort of mod I can use? Not bothered if I have to change the lever aswell, just getting fed up of having to check the nut everytime I set off. Thanks!

Post by **V4beermonster** » Mon Oct 14, 2013 4:07 pm

Locktite???

Post by **CMSMJ1** » Mon Oct 14, 2013 5:26 pm

buy a new nut, or lockwire the current one.

Seems a random issue - might well just be fecked.

NC30Dubz · Post by **NC30Dubz** » Wed Oct 16, 2013 1:57 am

Yeah, possibly just ruined. I think it's partly to do with the clutch cable, it's got a hard outer cover where it goes into the adjuster and everytime I turn the steering it must be damaging it. I'll give the glue a go and see how long that holds, new nuts are hard to come by. Thanks guys.

Post by **CMSMJ1** » Wed Oct 16, 2013 6:58 am

New nuts are easy to come by - surely? It will be the same as many other bikes.

Stick a picture up if you can

NC30Dubz · Post by **NC30Dubz** » Wed Oct 16, 2013 3:35 pm

You'd have thought so! Looking through eBay I'd have to buy the whole clutch assembly. Yeah will stick a pic up in a short while

Post by **CMSMJ1** » Wed Oct 16, 2013 6:48 pm

Sod ebay - I am talking a brand new bit from Honda - going to be a fiver or so I reckon

nc30 clutch modification

nc30 clutch modification

Re: nc30 clutch modification

Re: nc30 clutch modification

Re: nc30 clutch modification

Re: nc30 clutch modification

Re: nc30 clutch modification

Re: nc30 clutch modification