Trying to sort the NC30 oil leak. New clutch casing gasket ordered. I think the temp sensor may have a slight leak too, might as well replace both whilst the oil is out the bike.
Do I just need the sensor, or do I need a rubber grommet or something?
Cheers,
Dan
Temp Sensor Leak
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
iDemonix
- Site Supporter
- Posts: 651
- Joined: Tue Aug 24, 2010 10:26 pm
- Bike owned: '92 NC30
- Location: Banbury, Oxfordshire
Temp Sensor Leak
A roaring V4 is the summer soundtrack.
-
speedy231278
- NWAA Supporter
- Posts: 1549
- Joined: Tue Jul 03, 2012 11:58 am
- Bike owned: RVF400, TZR125, ZXR750R
Re: Temp Sensor Leak
I'm pretty sure it's self sealing. Doesn't seem to be an o-ring on the parts diagram. When I had the housing off of mine to replace the stat I removed it, cleaned it, and used a smear of instant gasket on the thread to be sure.
