Managed to source one locally, cheers bikemonkey :)
Now I need an abba stand and adapters which aren't cheap...
[NC30] New chain + sprockets + suspension question
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
iDemonix
- Site Supporter
- Posts: 651
- Joined: Tue Aug 24, 2010 10:26 pm
- Bike owned: '92 NC30
- Location: Banbury, Oxfordshire
Re: [NC30] New chain + sprockets + suspension question
A roaring V4 is the summer soundtrack.
-
lukemillar
- Site Supporter
- Posts: 690
- Joined: Thu Aug 26, 2010 11:43 pm
- Bike owned: '89 NC30 Racebike #24
- Location: Wellington, New Zealand
Re: [NC30] New chain + sprockets + suspension question
For gearing, check out:
http://www.gearingcommander.com
Will let you see the difference between different sprocket setups and also the same tooth/link value near the bottom.
http://www.gearingcommander.com
Will let you see the difference between different sprocket setups and also the same tooth/link value near the bottom.
-
NGneer
- Site Supporter
- Posts: 794
- Joined: Wed Jan 21, 2009 7:37 am
- Bike owned: x3 NC30,Matchless G80s AJS16ms
- Location: Köln
Re: [NC30] New chain + sprockets + suspension question
iDemonix wrote: On to the suspension...
The lowest point on the suspension linkage (dogbone?) has a knackered bushing, very nearly failed the MOT on it. Where would I find the correct size bushing and what's the easiest way to replace it? ...
...and which bushes would sir like (http://www.cmsnl.com/honda-vfr400r3-199 ... ml#results)
As for physicaly replacing them - I don't know. I have never done these ones (yet) so not sure if these are a case of a genuine "NEED a proper press" or like many others can be knocked in using the right sized socket as a drift.