NC29 stator cover removal
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Noodles
- Settled in member
- Posts: 31
- Joined: Wed Jul 11, 2012 8:47 pm
- Bike owned: GSXR1000K3 NSR125 CBR400NC29
- Location: Nr Hull
NC29 stator cover removal
Hi all, i am replacing the stator cover on my nc29 and need to know whether or not i need to drop the oil or can it be done by leaning the bike over the other way.
-
petrolhead19
- Site Supporter
- Posts: 454
- Joined: Sun Oct 04, 2009 4:48 pm
- Bike owned: 2 x nc23's 1 x nc29
- Location: preston
Re: NC29 stator cover removal
When ever i have took mine off i just lean the bike bud, no point dropping the oil
xivlia wrote:because i can smell and see petrol squirting out from the exhaust. like little droplets
porndoguk wrote:That will be condensation, if you think its petrol get a lighter bellow the exhaust and see what happens?
-
Davez29
- Site Supporter
- Posts: 1268
- Joined: Sun Aug 03, 2008 8:38 pm
- Bike owned: NC29 forever
Re: NC29 stator cover removal
Are you replacing the cover with one of those Chinese covers? If so give us your thoughts on them please.
-
Noodles
- Settled in member
- Posts: 31
- Joined: Wed Jul 11, 2012 8:47 pm
- Bike owned: GSXR1000K3 NSR125 CBR400NC29
- Location: Nr Hull
Re: NC29 stator cover removal
I have replaced the stator cover with a Chinese one and everything fitted and works as it should.
The only problem with it is that the colour is not an exact match for the other side covers.
The only problem with it is that the colour is not an exact match for the other side covers.