Cam Seizure

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
greggo
Site Supporter
Site Supporter
Posts: 444
Joined: Wed May 14, 2008 1:08 pm

Cam Seizure

Post by greggo » Mon May 20, 2013 1:00 am

So i've just had a cam seize from running dry in a newly rebuilt motor, everything was oiled on assembly and it seems to be a lack of oil to the cam.

Anyone ever had this before, and know if it is fixable?
Top
greggo
Site Supporter
Site Supporter
Posts: 444
Joined: Wed May 14, 2008 1:08 pm

Re: Cam Seizure

Post by greggo » Thu May 23, 2013 12:48 am

For those that didn't know, the oil galleries on the NC23 head and NC29 block do not line up and a simple modicfication is required: drill a fecking hole.

Problem solved.
Top
stimpy
Familiar Member
Posts: 369
Joined: Fri May 02, 2008 11:05 am

Re: Cam Seizure

Post by stimpy » Fri May 24, 2013 11:07 am

Much damage?
Stimpy
Top
Post Reply

Return to “Honda - Workshop”