Steering head bearing Rvf

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
Cueto65
Settled in member
Posts: 22
Joined: Tue Mar 26, 2013 4:31 pm
Bike owned: 2xcbr600rr,Nc35
Location: South Wales,UK

Steering head bearing Rvf

Post by Cueto65 » Sun Apr 07, 2013 8:22 am

Replaced the steering head bearings in my rvf,but I'm having trouble taking any play out of the clamps and top yoke...I've taken the top yoke off that many times I'm not sure if I'm putting lock nuts and tab back together in the right sequence!!!! Any help out and photos would be fantastic... :(
Top
User avatar
Drunkn Munky
Site Supporter
Site Supporter
Posts: 6313
Joined: Thu May 01, 2008 9:37 am
Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
Location: Kent

Re: Steering head bearing Rvf

Post by Drunkn Munky » Sun Apr 07, 2013 8:29 am

Check the part diagram on cmsnl if you don't have a Haynes manual, what bearings are you using, OEM Honda or pattern taper bearings?
Top
tigerclaw
Familiar Member
Posts: 290
Joined: Tue Feb 05, 2013 5:52 pm
Location: South Africa

Re: Steering head bearing Rvf

Post by tigerclaw » Sun Apr 07, 2013 8:35 am

Also look at the service manual in the downloads section for the correct sequence etc http://www.400greybike.com/files/NC30%2 ... Manual.pdf
Assuming the RVF is similar to the VFR
Top
Cueto65
Settled in member
Posts: 22
Joined: Tue Mar 26, 2013 4:31 pm
Bike owned: 2xcbr600rr,Nc35
Location: South Wales,UK

Re: Steering head bearing Rvf

Post by Cueto65 » Sun Apr 07, 2013 9:33 am

I'm using oem Honda ones
Top
Post Reply

Return to “Honda - Workshop”